Buckling analyses provide insight into structural stability through methods characterizing linear buckling which considers multiple buckling modes under nonlinear-static or dynamic application , nonlinear buckling which considers P-delta and large-deflection effects , snap-through buckling, and progressive collapse.
Material nonlinearity capture inelastic and limit-state behavior, along with such time-dependent phenomena as creep and shrinkage behavior in reinforced-concrete systems. Plastic hinging may be specified in flexural members according to code-based standards or empirical data. Tension and compression-only springs may be assigned with limits and nonlinear attributes to simulate support plasticity.
Static and dynamic methods are available for earthquake simulation. Nonlinear-static-pushover analyses may consider modal , uniform, or user-defined lateral load patterns, plastic-hinging behavior of slender elements, inelastic response of shear walls, floor slabs, and steel plates, and then formulate demand-capacity, damping, and performance-point calculations with customizable summary reports.
Dynamic methods include response-spectrum for likely maximum seismic response given pseudo-spectral acceleration vs. Time histories may follow modal or direct-integration methods, and they may be chained together and enveloped with such advanced analyses as P-delta and staged-construction procedures.
Staged-construction features are comprehensive. The construction sequence is scheduled with Gantt-chart options, enveloped with performance measures, and paired with analysis procedures. At each construction stage, evaluation may consider static or dynamic structural response, support reactions, geometric and material nonlinearity including buckling, creep, and shrinkage , tendon and cable application with target-tensioning, etc. The Model Alive feature is available for small to medium-sized projects to analyze real or possible structural modifications.
Design is fully integrated with the analysis process, enveloping results before automatically sizing steel members and designing reinforced-concrete sections.
Automatic steel, concrete, aluminum and cold-formed-framing design code checks ensure that structures meet criteria of American, Canadian, and a variety of international standards. Output and display options are intuitive and practical. Finalized member design, deformed geometry per load combination or mode shape, moment, shear, and axial-force diagrams, section-cut response displays, and animation of time-dependent displacements outline a few of the graphics available upon conclusion of analysis.
SAP automatically generates reports for the presentation of images and data. Built-in and customizable templates are available to users for specialized formatting. SAP also provides a suite of interoperability features. Visual Basic and most standard languages are supported. Several different levels of capability are offered for the SAP product. Once your software is more than three versions old, you must purchase the software at full cost if you wish to obtain the latest version.
Thank you for submitting a Statement Concerning Sales Tax. You have indicated that your company is exempt from paying sales tax. Thank you for your prompt attention to this matter. We will review the document you have submitted, and we will contact you if any further action is needed.
You have indicated that you will be mailing a check to Computers and Structures, Inc. Please mail your check to: Computers and Structures, Inc. Attn: Accounts Receivable N. Suite Walnut Creek, CA The inquiry will be closed once payment is received. We will review the details you have submitted, and we will contact you if any further action is needed. You have indicated that your company has already paid the sales tax for the order referenced.
This page contains a list of short URLs that redirect to other pages. The software you seek to install or previously have installed from Computers and Structures, Inc. Access to and use of the Software is by permission of Vendor only, and only for applicants who accept this Agreement.
Vendor may grant or withhold approval in its sole discretion. Based on the foregoing and for other good and valuable consideration, you and Vendor agree as follows:. This Agreement is a legal contract made between you and Vendor. This Agreement contains the terms and conditions with which you must comply in order to access and use the Software.
The license allows you to use only one copy of the Software on one computer concurrently, whether that computer is physical or virtual. The Software may be run by multiple users on one or more machines provided enough concurrent user licenses are acquired from Vendor and dedicated for each separate user that will run the Software concurrently.
Beta and Trial Version License. Some of the Software may be licensed on a beta or trial basis, which may not be used for commercial or professional use. Your rights to use beta or trial software are limited to the time period specified by Vendor. Academic License. Academic Licenses may be used strictly for non-commercial teaching, lesson planning, and research purposes only. Academic licenses are identified as such on the Sales Order confirmation. Geographic Restriction.
The Software may only be used in the country identified when the software license was purchased as the country where the software will be used. Pre-existing Global Licenses are not restricted geographically. License Key. During the term of this Agreement, Vendor periodically may issue a license key file, activation key, internet-based account, or other similar method to enable the Software to execute on the computer or server designated by you.
Condition of Payment. The license granted herein is conditioned upon payment in full for the Software in advance of your use of the Software. Vendor retains all rights to the Software and the Documentation not specifically granted in this Agreement. Vendor owns the Software and the Documentation and all copyright and other intellectual property rights therein, and this Agreement does not transfer to you any title to or any proprietary or intellectual property rights in or to the Software, any updates or derivative works thereto, or the Documentation, or any copyrights, patent rights, or trademarks embodied or used in connection therewith, except for the rights expressly granted in this Agreement.
The Software and the Documentation are protected by United States laws and international treaty provisions. To the maximum extent permitted by law, you shall not a modify, reverse engineer, decompile, disassemble, or attempt to derive the source code of the Software; b rent, lease, loan, sell, sublicense, distribute, transmit, network, or otherwise transfer the Software access to any third party; c make any copy of or otherwise reproduce or display the Software or any of the browser screens comprising the Software user interface except for those copies necessarily made by the personal computer and Internet browser that are running the Software; d use hardware or software to multiplex or pool connections, or otherwise allow multiple users or multiple computers or devices to access or use the Software indirectly through the licensed computer; e disclose your license key provided by Vendor; or f disclose your User ID or Password to any third party.
You agree to take all reasonable steps to safeguard your User ID and Password for the Software so as to ensure that no unauthorized person will have access to it, and that no persons authorized to have access will make any unauthorized use. You shall promptly report to Vendor any unauthorized use of the Software of which you become aware and shall take such further steps as may reasonably be requested by Vendor to prevent unauthorized use thereof.
You shall be solely responsible for the following: a providing all hardware, software, and communications capabilities required for use of the Software, as specified by Vendor; b generating, providing, and loading your data into the Software, including, without limitation, historical data to permit you to use the Software; and c providing and maintaining, at all times during the term of this Agreement, the Internet access necessary for your use of the Software.
The license granted in this Agreement is effective in perpetuity, as long as you own the Software License and adhere to the terms and conditions of this Agreement. In cases of fixed-term or leased licenses, the term of this Agreement coincides with the term of the license, which is specified on the order confirmation. The term of this Agreement and the license grant herein shall commence on the date you agree to this Agreement and install the Software.
In the event you install a Software upgrade, this license agreement terminates. This license shall also terminate automatically on your failure to comply with any of the other terms of this Agreement. On termination of this Agreement, you agree to promptly discontinue use of the Software, deactivate the license key per instructions provided by Vendor, destroy all printed copies and delete all electronic copies of any documentation that you have downloaded, printed, or created relating to the Software, and to ensure that no copies of any of the Software screens, data, or other content remain archived or otherwise stored on your computers.
Notwithstanding termination, the provisions of Sections 3, 6, 7, 8, 9, and 10 of this Agreement shall survive and continue to apply. You shall maintain the confidentiality of all Confidential Information and shall not use it for any purpose other than the performance of this Agreement.
Notwithstanding the foregoing, Confidential Information does not include information that you can demonstrate was a publicly available at the time of disclosure, or later became publicly available through no act or omission by you; b in your possession before disclosure by Vendor; or c disclosed to you by a third party not in violation of any obligations of confidentiality to Vendor or to any third party.
The collection of this Data may be necessary to you and your users with relevant Software or Technical Support. Without access to this Data, we may not be able to verify your compliance with this Agreement, among other things. By entering into this agreement or using the Software or Technical Support, you and your users agree to the collection, processing, copying, backup and storage of this Data in and from the United States or other countries or jurisdictions outside of your or your users' own as part of the Software or Support.
Please note that we may need to retain certain records for legal or internal business reasons and some of your information may remain on backup systems in compliance with applicable law.
You are not entitled to receive damages from Vendor for any cause relating to this Agreement, to your use of the Software, to any services provided by Vendor under this Agreement, or to any services provided by any third party in connection with your use of the Software.
In addition, in no event shall you be entitled to obtain any injunctive relief or enjoin, restrain, or otherwise interfere with Vendor or with the distribution, operation, development, or performance of the Software or any related products.
Such refund is subject to the discontinuance of the use of the Software, deactivation of the license key per instructions provided by Vendor, destroying all printed copies and deleting all electronic copies of any documentation that you have downloaded, printed, or created relating to the Software, and ensuring that no copies of any of the Software screens, data, or other content remain archived or otherwise stored on your computers, during the Warranty Period, and providing declaration of same to Vendor.
Because some states do not allow the exclusion or limitation of liability for consequential damages, the above limitation may not apply to Licensee. This Agreement shall in all respects be governed by and be construed in accordance with the laws of the State of California, without regard to its conflict of laws provisions.
If the performance of Vendor under this Agreement is prevented, hindered, or otherwise made impractical by reason of flood, strike, war, acts of government, or any other casualty or cause beyond the control of Vendor, then Vendor shall be excused from its performance to the extent and so long as it is prevented, hindered, or delayed by such event s. If any one or more of the provisions contained in this Agreement shall, for any reason, be held to be invalid, illegal, or unenforceable in any respect, then to the maximum extent permitted by law, such invalidity, illegality, or unenforceability shall not affect any other provision of this Agreement.
You may not assign this Agreement or any of the rights granted by Vendor hereunder, in whole or in part, without the prior written consent of Vendor, and any attempt to do so shall be void. This Agreement is binding on and shall inure to the benefit of the parties and their respective successors and permitted assigns.
In the event of legal action brought by either party, the prevailing party shall be entitled to reimbursement of actual legal fees and related expenses. You agree to obey and comply with any and all applicable United States laws, rules, and regulations governing the export of software. Thank you for your request. It has been submitted to our sales team.
We will respond to you within one business day. Continue to CSI Home. This is a binding agreement. By using the Internet site located at www. Company will post a notice on the Site any time these Terms of Use have been changed or otherwise updated.
It is your responsibility to review these Terms of Use periodically, and if at any time you find these Terms of Use unacceptable, you must immediately leave the Site and cease all use of the Service and the Site. Company respects your privacy and permits you to control the treatment of your personal information. When you are required to open an account to use or access the Site or Service, you must complete the registration process by providing the complete and accurate information requested on the registration form.
You will also be asked to provide an email address and password. You are entirely responsible for maintaining the confidentiality of your password.
You may not use the account, email address, or password of someone else at any time. You agree to notify Company immediately on any unauthorized use of your account, email address, or password. Company shall not be liable for any loss that you incur as a result of someone else using your password, either with or without your knowledge.
Company may make certain software available to you from the Site. Company does not transfer either the title or the intellectual property rights to the Software, and Company retains full and complete title to the Software as well as all intellectual property rights therein.
You may not sell, redistribute, or reproduce the Software, nor may you decompile, reverse-engineer, disassemble, or otherwise convert the Software to a human-perceivable form. All trademarks and logos are owned by Company or its licensors and you may not copy or use them in any manner. When accessing the Site or using the Service, you agree to obey the law and to respect the intellectual property rights of others.
Your use of the Service and the Site is at all times governed by and subject to laws regarding copyright ownership and use of intellectual property. You agree to abide by laws regarding copyright ownership and use of intellectual property, and you shall be solely responsible for any violations of any relevant laws and for any infringements of third party rights caused by any Content you provide or transmit, or that is provided or transmitted using your User ID.
The burden of proving that any Content does not violate any laws or third party rights rests solely with you.
You shall not make the following types of Content available. You agree not to upload, download, display, perform, transmit, or otherwise distribute any Content that a is libelous, defamatory, obscene, pornographic, abusive, or threatening; b advocates or encourages conduct that could constitute a criminal offense, give rise to civil liability, or otherwise violate any applicable local, state, national, or foreign law or regulation; or c advertises or otherwise solicits funds or is a solicitation for goods or services.
Company reserves the right to terminate your receipt, transmission, or other distribution of any such material using the Service, and, if applicable, to delete any such material from its servers. Company intends to cooperate fully with any law enforcement officials or agencies in the investigation of any violation of these Terms of Use or of any applicable laws.
Company has in place certain legally mandated procedures regarding allegations of copyright infringement occurring on the Site or with the Service. Company's policy is to investigate any allegations of copyright infringement brought to its attention. For this notification to be effective, you must provide it to Company's designated agent at:. Advanced analytical techniques allow for step-by-step large deformation analysis, Eigen and Ritz analyses based on stiffness of nonlinear cases, catenary cable analysis, material nonlinear analysis with fiber hinges, multi-layered nonlinear shell element, buckling analysis, progressive collapse analysis, energy methods for drift control, velocity-dependent dampers, base isolators, support plasticity and nonlinear segmental construction analysis.
From a simple small 2D static frame analysis to a large complex 3D nonlinear dynamic analysis, SAP is the easiest, most productive solution for your structural analysis and design needs. Pipe Stress Analysis and Design. CSiPlant is an integrated engineering software product for analysis and design of piping systems and frame structures,. CSiBridge design allows for quick and easy design and retrofitting of steel and concrete bridges.
Analysis, Design and Drafting of Building Systems. ETABS is the solution, whether you are designing a simple 2D frame or performing a dynamic analysis of a complex high-rise that utilizes non-linear dampers for inter-story drift control. Reinforced Concrete Column Design. CSiCOL is a comprehensive software package used for the analysis and design of columns. Design Of Slabs, Mats and Footings. SAFE is the ultimate tool for designing concrete floor and foundation systems.
From framing layout all the way through to detail drawing production, SAFE integrates every aspect of the engineering design process in one easy and intuitive environment. SAP has been rated 3.
0コメント