I can't connect to the internet. What happened? Is my modem bricked? Work For Me!! But I don't suggest to update your firmware.. Tlg sye buat smua tkleh connect dh Setelah baiki melalui ssh client usb to ttl masalah selesai..
Terima kasih! Hari tu aku accidentally buat factory reset dekat router aku ni. Bezanya selepas guna firmware ni, tak ade logo TM dah. Confirmed working! Sehari suntuk saya takde internet hanya sebab huruf pertama username saya capital letter.
Double confirm dengan tm net, cakap jer awak nak password sebab nak login tm wifi internet percuma di hotspot dikawasan awam. Post a Comment. FM Myspace Friendster. Newer Post Older Post Home. Subscribe to: Post Comments Atom. A Liga Malaysia Have all the necessary information and equipment on hand before beginning the installation.
In order to establish a connection to the Internet it will be necessary to provide information to the Router that will be stored in its memory. For some users, only their account information Username and Password is required. For others, various parameters that control and define the Internet connection will be required.
You can print out the two pages below and use the tables to list this information. This way you have a hard copy of all the information needed to setup the Router. If it is necessary to reconfigure the device, all the necessary information can be easily accessed.
Be sure to keep this information safe and private. Since ADSL and telephone services share the same copper wiring to carry their respective signals, a filtering mechanism may be necessary to avoid mutual interference. A low pass filter device can be installed for each telephone that shares the line with the ADSL line. Ask your service provider for more information about the use of low pass filters with your installation. Any common web browser can be used to configure the Router using the web configuration management software.
The web browser must have JavaScript enabled. JavaScript is enabled by default on many browsers. Make sure JavaScript has not been disabled by other software such as virus protection or web user security packages that may be running on your computer. Any computer that uses the Router must be able to connect to it through the Ethernet port on the Router. This connection is an Ethernet connection and therefore requires that your computer be equipped with an Ethernet port as well.
Most notebook computers are now sold with an Ethernet port already installed. Likewise, most fully assembled desktop computers come with an Ethernet NIC adapter as standard equipment. If your computer does not have an Ethernet port, you must install an Ethernet NIC adapter before you can use the Router. If you must install an adapter, follow the installation instructions that come with the Ethernet NIC adapter.
All the For basic wireless communication you need to decide what channel to use and what SSID to assign. These two settings must be the same for any wireless workstations or other wireless access point that communicate with the DSLB through the wireless interface. Security for wireless communication can be accomplished in a number of ways. Wireless access can also be controlled by selecting MAC addresses that are allowed to associate with the device. Please read the section on Wireless Configuration.
It is commonly in the form user isp. Your ADSL service provider uses this to identify your account. This is used to verify the identity of your account. These settings describe the method your ADSL service provider uses to transport data between the Internet and your computer. Most users will use the default settings. ADSL uses various standardized modulation techniques to transmit data over the allotted signal frequencies. Some users may need to change the type of modulation used for their service.
Most users will not be required to change this setting. This setting can be changed in the WAN Settings window of the web management interface. When you attempt to connect to the device through a web browser you will be prompted to enter this Username. The default IP address is This may be changed to suit any IP address scheme the user desires.
The default subnet mask is This can be changed later. This means that it can assign an IP address, subnet mask, and a default gateway address to computers on your LAN. Your computer or computers needs to be configured to obtain an IP address automatically that is, they need to be configured as DHCP clients. It is recommended that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL connection in the future. DSLB lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network.
Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF radio frequency noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:.
Position your devices so that the number of walls or ceilings is minimized. Be aware of the direct line between network devices. A wall that is 1. At a 2-degree angle it looks over 42 feet 14 meters thick!
Position devices so that the signal will travel straight through a wall or ceiling instead of at an angle for better reception. Building Materials make a difference.
A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water fish tanks , mirrors, file cabinets, brick, and concrete will degrade your wireless signal. Keep your product away at least feet or meters from electrical devices or appliances that generate RF noise.
If you are using 2. Make sure your 2. The base transmits a signal even if the phone in not in use. Place the Router in a location where it can be connected to the various devices as well as to a power source. The Router should not be located where it will be exposed to moisture, direct sunlight or excessive heat.
Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard. As with any electrical appliance, observe common sense safety procedures.
The Router can be placed on a shelf, desktop, or other stable platform. If possible, you should be able to see the LED indicators on the front if you need to view them for troubleshooting. Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Router and plug the adapter into a suitable nearby power source. If this is the first time installing the device, some settings may need to be changed before the Router can establish a connection.
The Router may be reset to the original factory default settings by using a ballpoint or paperclip to gently push down the reset button in the following sequence:. Press and hold the reset button while the device is powered off. Remember that this will wipe out any settings stored in flash memory including user account information and LAN IP settings.
The device settings will be restored to the factory default IP address Plug one end of the cable into the ADSL port. RJ receptacle on the rear panel of the Router and insert the other end into the RJ wall socket. If you are using a low pass filter device, follow the instructions included with the device or given to you by your service provider. When connecting the Router to any. Ethernet device that is capable of operating at speeds higher than 10Mbps, be sure that the device has auto-negotiation NWay enabled for the connecting port.
Use standard twisted-pair cable with RJ connectors. Follow standard. Ethernet guidelines when deciding what type of cable to use to make this connection. When connecting the Router directly to a PC or server use a normal straight-through cable.
Be sure that the cable connecting the LAN to the Router does not exceed meters. If you wish to reserve the uplink port on the switch or hub for another device, connect to any on the other MDI-X ports 1x, 2x, etc. This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. To configure the WAN connection used by the Router it is first necessary to communicate with the Router through its management interface, which is HTML-based and can be accessed using a web browser.
To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router
0コメント